|
|
.JPG) |
|
.JPG "Seems like one towel from every load..."){kind=small}
.JPG "That Schrader valve sticking out from..."){kind=small}
.JPG "I found a forum where other folks..."){kind=small}
.JPG "First I tried softening the plastic..."){kind=small}
.JPG "Back tracking a bit, I have to say..."){kind=small}
.JPG "The inner tube had to wrap three..."){kind=small}
.JPG "I began looking at how best to grab..."){kind=small}
.JPG "Bent it up on the bench vise by hand."){kind=small}
.JPG "Although the Agi-Tamer..."){kind=small}
.JPG "Tapered the ends in just a bit, to..."){kind=small}
| Over the past 32 years, I've replaced a drive belt, cleaned a motor start contact, and fixed the siphon break in the fill tube just under the left side top. You can see rust at the edge of the bleach dispenser -- I've been meaning to clean that up. | |
| Total images: 27 | Last update: 7/21/10 4:53 PM | Help | |